a b c d 4 3 2 1 d c b a 1 2 4 3 rp-sma female bulkhead mount cable end crimp for rg174 cable recommended mounting hole ? 0.254 (6.50) 0.234 (6.00) 0.254 (6.50) 0.256 (6.60) recommended cable stripping dimensions 0.128 (3.30) rg-174 cable CONREVSMA005 assembly instructions 1. insert the center conductor through the retaining nut, shield sleeve, and spacer. 2. solder the pin to the center conductor. 3. insert the pin into the pin insulator, then screw the main body onto the retaining nut. 4. wrap the braid around the tail of the body and crimp the ring with a 0.137" hex crimp tool (or one labeled for use with rg-174 cable). 5. use the shrink wrap to cover the crimp ring. 6. use the nut and washer to secure the connector to a case. pin insulator shrink wrap crimp ring retaining nut shield sleeve spacer pin main body washer nut stripped cable description material finish nut washer main body nickel nickel nickel brass brass brass pin insulator teflon teflon pin gold brass spacer teflon teflon shield sleeve nickel brass retaining nut nickel brass crimp ring nickel brass connector city 159 ort lane merlin, or 97532 ph (541)-471-6256 fax (541)-471-6251 date: sheet 1 of 1 revision: title part no. dimensions: CONREVSMA005 1.0 inches (mm) 3/2/2005 ?0.402 (10.20) 0.020 (0.50) 0.065 (1.65) 1/4-36uns-2b threads h8 0.371 (9.50) ?0.154 (3.90) 0.446 (11.40) 0.636 (16.30) 0.955 (24.50) 0.244 (6.20) ? 0.102 (2.60) 1/4-36uns-2a threads 0.441 (11.20) ? 0.071 (1.80) side view pin crimp ring washer nut
|
